This is a driver for PL2303 based USB to RS232 adaptors. The PL2303 is a chip produced by Prolific Technology Inc. of Taiwan and is a very common chip to find in such adaptors. The driver requires version 0.92 or later of the USB Host library and needs a Honeycomb 3.1 or later device with USB host support .
This driver is not up to the standard that I would normally expect of myself. However it is unavoidably crippled by problems with the Android implementation of USB support and has been produced by reverse engineering a Linux driver as Prolific only provide chip operation details to their OEMs and do not publish an operation manual. Erel has suggested that I post it anyway as it is probably usable in at least some situations.
The specific problems that beset the Android USB support concern data transfer. There are two ways to transfer data in and out, asynchronously by queueing Requests and synchronously using the BulkTransfer method. Of the four possibilities two are broken in Android. Asynchronous reads will transfer fixed length arrays of data but there is no way of telling you how many bytes of the returned arrays contain valid data! I have also found a problem with synchronous writes. BlockTransfer is supposed to return a value of how many bytes it has written, or a -ve number if a fault occurred. However I was getting return values of -1 even though the data has been successfully sent! So we have a USB implementation that can't tell you how many bytes you have received nor how many bytes you have sent!
This driver implementation therefore has to use asynchronous writes and synchronous reads invoked by a Timer in order to provide some semblance of functionality. The use of synchronous reads limits the data rates that can be reliably supported without dropping data. If you have a PL2303 based adaptor then have a play yourself.
This driver is not up to the standard that I would normally expect of myself. However it is unavoidably crippled by problems with the Android implementation of USB support and has been produced by reverse engineering a Linux driver as Prolific only provide chip operation details to their OEMs and do not publish an operation manual. Erel has suggested that I post it anyway as it is probably usable in at least some situations.
The specific problems that beset the Android USB support concern data transfer. There are two ways to transfer data in and out, asynchronously by queueing Requests and synchronously using the BulkTransfer method. Of the four possibilities two are broken in Android. Asynchronous reads will transfer fixed length arrays of data but there is no way of telling you how many bytes of the returned arrays contain valid data! I have also found a problem with synchronous writes. BlockTransfer is supposed to return a value of how many bytes it has written, or a -ve number if a fault occurred. However I was getting return values of -1 even though the data has been successfully sent! So we have a USB implementation that can't tell you how many bytes you have received nor how many bytes you have sent!
This driver implementation therefore has to use asynchronous writes and synchronous reads invoked by a Timer in order to provide some semblance of functionality. The use of synchronous reads limits the data rates that can be reliably supported without dropping data. If you have a PL2303 based adaptor then have a play yourself.
