Search Results

pins), using the rWire library. Inertial Measurements (mpu6050) : ' MPU 6050 board - Inertial... Private wire As WireMaster Private raf As RandomAccessFile Private const MPU As Int = 0x68... Serial1.Initialize(115200) wire.Initialize wire.WriteTo(MPU, Array As Byte(0x6b, 0...
link: To use the boards on WEMOS D1 - connect to SCL and SDA on the board (two options !). To connect to NodeMcu - connect SCL to D1 and SD...
link: Don't use a Looper + delay. You should instead use a timer with an interval of 700ms. AddLooper should only be used when you wan...

It is based on this tutorial. Nano programmed via B4R and visualizing the data from the MPU6050...("loop1", Null) End Sub #If C /* Arduino and MPU6050 Accelerometer and...
link: Make sure you are setting the port correctly in the Processing sample project for your Arduino proc...
link: Thanks, I will try this Make sure you are setting the port correctly in the Processing sample proj...
link: Thanks, I will try this...

for MPU6050 // Version 1.1 (31th January 2014) // Done by Luis Ródenas <luisrodenaslorda@gmail.../i2cdevlib // These offsets were meant to calibrate MPU6050's internal DMP, but can be also useful...
link: Thanks, but it's another way :)...
link: Now task is "just" write the calibration deltas into the IC. Reduce the offset parameter...
link: All about reading data is already done. Now task is "just" write the calibration deltas in...

way to use the subject. If no ready lib for MPU-6050 at ESP8266 (this one is only for Arduino PCBs, as i can understand)- how to use generic I2C code to work with MPU-6050 ? Any example ?...
link: look OK. Note: that MPU6050 chipset can be defective: one of my 3 pcs always returns AcY=1.9999 g...
link: /threads/inertial-measurements-mpu-6050-and-magnetometer-hmc5883l.65917/post-417358 'Used https://www...
link: https://www.b4x.com/android/forum/threads/inertial-measurements-mpu-6050-and-magnetometer-hmc5883l...

Library to read values from the MPU6050 MotionTracking device by InvenSense. The library.... requires the classes (included in the MPU6050 folder): SoftI2C, II2C, I2C, MPU6050 Documentation used... for the Tests MPU6050 = Arduino Uno (Wirecolor) VCC = +5v (red) GND = GND (black) SCL = D5 (Arduino...
link: Hi, have checked out from here (the Arduino Library from which the B4R is wrapped): the library is for dedicated use with the Arduin...
link: with using the rMPU6050 library with ESP8266 (Wemos D1 R2). The compiler throws an error as shown below...

it is a wrapper for mpu6050 library modified for ESP8266 compatibility from Emanuele Buchicchio https://github.com/emanbuc/ESP8266_MPU6050 this wrapper provide on B4R interface, all functions of this library available in Arduino. this wrapper provide 2 class: - mpu6050 with all functions - mpu6050_data with all parameters needed to manage the library several examples B4R are added, based on examples.ino...

after a test of MPU6050 , please to find a new version of I2C_scanner and a new version of rTinyMPU6050. in my case, with I2C_scanner i can confurm MPU6050 availability at address 0x68 and after...
link: you can try with this other library : https://github.com/emanbuc/ESP8266_MPU6050 this one check...
link: Hi I use a library with name TinyMPU6050 that attached below. fow show the gyroscop x or y or z...
link: no i didn't test this library with MPU6050 because i don't have one available...

-measurements-mpu-6050-and-magnetometer-hmc5883l.65917/ , no need for any library. Googling...-mpu-6050-and-magnetometer-hmc5883l.65917/ , no need for any library. Hi again I used your first...
link: Googling I found this : The MPU-6050 sensor operates at 3.3V. but the GY-521 module contains a 3...
link: You can use my example https://www.b4x.com/android/forum/t...nts-mpu-6050-and-magnetometer-hmc5883l...
link: -measurements-mpu-6050-and-magnetometer-hmc5883l.65917/ , no need for any library. Hi. my problem...

There is this example: https://electrosome.com/interfacing-mpu-6050-gy-521-arduino-uno/...
link: And another: https://www.mschoeffler.de/2017/10/05/tutorial-how-to-use-the-gy-521-module-mpu-6050...

the accurate Heading value. Here, accelerometer values are read from MPU6050 Accelerometer+Gyroscope module...