B4J Question B4J library for OLED display with SH1106 driver

[raphaelcno]

I plan to try to use a SH1106 display with Raspberry Pi, so I'm wondering if there is a B4J library for SH1106 driver.

I see that there is a B4R library for SH1106:
https://www.b4x.com/android/forum/threads/radafruitsh1106-sh1106-lcd.92204/

I see also that there is a code module for SSD1306 which can be used in B4J:
https://www.b4x.com/android/forum/t...with-contrallable-fan-and-oled-display.136054
SH1106 is similar to SSD1306, but there are some differences as described here:
https://picaxeforum.co.uk/threads/fyi-comparing-the-ssd1306-and-sh1106-oled-drivers.32387/
Maybe it's possible to do some small changes to the SSD1306 code module in order to use it with SH1106?

Thank you for your help and knowledge

 

[teddybear]

Perhaps you can use the library to drive SH106.

 

[raphaelcno]

Yes, the code you refer to is relevant for the general I2C communication, and it is also included in the "i2c" code module in the example from sorex (https://www.b4x.com/android/forum/t...ith-contrallable-fan-and-oled-display.136054/).
But there is a separate "ssd1306" code module which contains all specific commands for the SSD1306, and I'm wondering if there is something similar for the SH1106.