Android Question BLE speed

tonga said:

Hi to all,

I'm working about Ble_example that is connected with a MCU. I see, using Logging of received data, that the data, sent in regular interval of time from MCU, are received by tablet not in regular mode but are received in bursts, sign that many of these are lost. There is a mode to speed up the reciever?

Thanks

Click to expand...

tonga said:

Hi SteveTerrell,
I think you can rule out this hypothesis because, in the same environment and with the same components, I modified an app with Android Studio and using this app the update of read values is much faster.

Click to expand...

tonga said:

The response speed is the same even in release mode.
To detect the received data I use the subroutine "Sub Manager_DataAvailable (ServiceID As String, Characteristics As Map)" of "Starter".
It would be useful to send data every 10-20ms

Click to expand...

Dim receivedString As StringBuilder
    receivedString.Initialize
    If ServiceId.StartsWith("6e400001") Then
        For index = 0 To Characteristics.Size-1
            Dim cKey As String = Characteristics.GetKeyAt(index)
            If cKey.StartsWith("6e400003") Then
                Dim bytes() As Byte = Characteristics.GetValueAt(index)
                If bytes.Length > 0 Then
                    Dim s As String = BytesToString(bytes,0,bytes.Length,"UTF8")
                    receivedString.Append(s)
                End If
            End If
        Next

tonga said:

Have you an example code that use Asyncstream with BLE?

Click to expand...

tonga said:

Some time ago I used prefix AsyncStream with basic bluetooth, but the speed was about the same as that of now, so I have some doubts on the success

Click to expand...

tonga said:

After the pairing the MCU send data continuosly. I insert a seekbar that follows the position of a capsense slider. I try to use a timer to monitor the data avalaible: nothing. It seems that a good part of data passes away...

Click to expand...