B4A Library BleExtended

Antti Mauranen · Dec 10, 2013

Hello,

I made some additions into Ble Library (write, notifications) and Erel asked me to post the extended library here. I made those additions to get my prototype working, so it is not necessarily of production quality but anayway works well for me just now.

I use this library exactly as the original one (+ additons of course) and I compile it with SimpleLibraryCompiler. It has same name and version number as the original.

The library source code is in the zip file.

Erel · Dec 10, 2013

Thank you for sharing this.

sdujolo · Dec 20, 2013

Hello can you share it as library and example?

Antti Mauranen · Dec 20, 2013

sdujolo said:
Hello can you share it as library and example?

Yes, but that can take some time because of the Christmas time.

You can very easily compile the library with SimpleLibraryCompiler and you can see the new methods easily and they are used very much in the same way as the old one's.

John Lin · Dec 20, 2013

Many thanks to Erel & Antti sharing this library. It does great help for me.
But I have a question. Can i disconnect the BLE in my code? or only I can do by closing my APP.
Thanks your reply!

Antti Mauranen · Dec 20, 2013

There is a method for that, bleManager.Disconnect. I use that and it works well for me at least.

John Lin · Dec 21, 2013

I'm sorry, but I have tried many times. There is no Disconnect method on bleManager. Only an event "Disconnected".
Do I have something wrong??

sdujolo · Dec 21, 2013

John Lin said:
I'm sorry, but I have tried many times. There is no Disconnect method on bleManager. Only an event "Disconnected".
Do I have something wrong??

I think you have orginal version of BLE. I compiled it wiht other library name so I know it´s the right version.

John Lin · Dec 21, 2013

Thanks, sdujolo . I used the old version of BleExtend, After I download again and everything goes well.
Thanks for your advice.

avalle · Jan 11, 2014

@Antti, great job!
I'm trying to write some data to a BLE peripheral and get a notification, but I'm struggling without documentation or samples...
Could you share a small example of using the methods and events that you added to the extended library?

@Erel I know I'm boring you asking for an update to the official BLE library, but given the growing interest in this area with more and more BLE-enabled devices out there this is becoming a must have in B4A. Is it in the plan for the next release? If not when?

I'm also interested to know if the instability/immaturity that you noticed in the earlier Android implementation (API 18) have improved in API 19.

avalle · Jan 11, 2014

Finally I was able to get rid of the additional features of the BLE extended library. I'm now able to write data to my peripheral and to to register for a notification of a Characteristic and read the value from the Change event. I can post the code if anyone is interested.

However I have a strange behavior when writing data out to the BLE peripheral. Let's start from the code:

B4X:

Sub Button3_Click
   Log("Message " & x)
   manager.WriteCharacteristic(c)
End Sub

Sub ble_CharacteristicWrite (Success As Boolean, Characteristic As BleCharacteristic)
  If Success Then
      Characteristic.SetStringValue("Message " & x)
      x = x + 1
  End If
End Sub

When Button3 is pressed the Write method is called and let's say "Message 0" is logged.
The ble_CharacteristicWrite event is immediately fired but I don't get the data immediately at the peripheral.
As Button3 is pressed again I get "Message 1" in the log and finally I also get the old "Message 0" at the peripheral.
In practice it seems like the written data is hold in the app until the next Write is fired.

Am I doing something wrong or what is the intended way to Write data to get it in sync at the peripheral?
Thanks for your suggestions/comments.

riccf · Jan 15, 2014

avalle said:
Finally I was able to get rid of the additional features of the BLE extended library. I'm now able to write data to my peripheral and to to register for a notification of a Characteristic and read the value from the Change event. I can post the code if anyone is interested.

However I have a strange behavior when writing data out to the BLE peripheral. Let's start from the code:

B4X:

Sub Button3_Click Log("Message " & x) manager.WriteCharacteristic(c) End Sub Sub ble_CharacteristicWrite (Success As Boolean, Characteristic As BleCharacteristic) If Success Then Characteristic.SetStringValue("Message " & x) x = x + 1 End If End Sub

When Button3 is pressed the Write method is called and let's say "Message 0" is logged.
The ble_CharacteristicWrite event is immediately fired but I don't get the data immediately at the peripheral.
As Button3 is pressed again I get "Message 1" in the log and finally I also get the old "Message 0" at the peripheral.
In practice it seems like the written data is hold in the app until the next Write is fired.

Am I doing something wrong or what is the intended way to Write data to get it in sync at the peripheral?
Thanks for your suggestions/comments.

Hello avalle

I also think BLE will become more used I trying to figure out this GATT profile a little better and I could use any snippet or code you could share, I'm struggling so I would appreciate if you post the code to read from the server chip.....

avalle · Jan 15, 2014

Hello riccf, here is the full project that I am currently testing. I am using my Galaxy SIII running Cyanogen 11 (Android 4.4) as Central unit and a HM-10 BLE module as Peripheral.
To test this you have to connect the HM-10 to a serial port (either a microcontroller or a PC through a FTDI adaptor or similar to convert the serial port to USB) and a terminal emulator like Real Term or Tera Term.

Please let me know if you're able to test and if you can learn something new.

-Andrea

riccf · Jan 16, 2014

avalle said:
Hello riccf, here is the full project that I am currently testing. I am using my Galaxy SIII running Cyanogen 11 (Android 4.4) as Central unit and a HM-10 BLE module as Peripheral.
To test this you have to connect the HM-10 to a serial port (either a microcontroller or a PC through a FTDI adaptor or similar to convert the serial port to USB) and a terminal emulator like Real Term or Tera Term.

Please let me know if you're able to test and if you can learn something new.

-Andrea

Hello
I have exactly the same setup ,same phone with mod for 4.4 , same module HM-10 trying to update the HC-06 but I just realized there's no SPP in 4.0 , I really appreciate you sharing I'll keep you updated.

mr23 · Jan 16, 2014

B4X:

javac 1.7.0_25
[...]\src\BleManager.java:8: error: cannot find symbol
import android.bluetooth.BluetoothGatt;
                        ^
  symbol:   class BluetoothGatt
  location: package android.bluetooth
1 error

First simple library compile I've tried. 3.2B4A. Latest SimpleLibraryCompiler.
Hints for a first-timer?

Erel · Jan 16, 2014

Make sure that the referenced android.jar is from api level 19+.

avalle · Jan 16, 2014

I think API 18+ is enough (Android 4.3) but linking the latest is definitely better.

I've attached the BLE library that I'm using, based on Antti's work and compiled with API 19 SDK.
Hope it helps go through my sample code.

riccf · Jan 16, 2014

avalle said:
I think API 18+ is enough (Android 4.3) but linking the latest is definitely better.

I've attached the BLE library that I'm using, based on Antti's work and compiled with API 19 SDK.
Hope it helps go through my sample code.

Works, thank you , the range is not what I expected .

avalle · Jan 16, 2014

Are you talking about the Beacon functionality? If that's the case I also had a wrong result using the HM-10 module with firmware V519.
I just discovered that V520 is available and it fixed that. Go to the manufacturer website to get it.

riccf · Jan 16, 2014

avalle said:
Are you talking about the Beacon functionality? If that's the case I also had a wrong result using the HM-10 module with firmware V519.
I just discovered that V520 is available and it fixed that. Go to the manufacturer website to get it.

The firmware stabilized the reading... Do you know if you can control io on the HM-10 trough Bluetooth connection?

B4A Library BleExtended

Attachments

B4X founder

Member

Member

New Member

Member

New Member

Member

New Member

Active Member

Active Member

Member

Active Member

Attachments

Member

Active Member

B4X founder

Active Member

Attachments

Member

Active Member

Member

Similar Threads

Privacy & Transparency

Privacy & Transparency