B4R Question Can't find the board type

[lingqdy1]

 

[lingqdy1]

按照教程进行安装，但找不到板型。我不知道'不知道这个错误是什么意思。

 

[lingqdy1]

Following the tutorial for installation, but the board type cannot be found. I don't know what this error means.

 

[hatzisn]

Two things could be happening (the a is almost for sure the correct one):
a) You did not install in Arduino IDE the corresponding board or set of boards (f.e. Google "how can I install the board...." f.e. ESP8266 or ESP32 or your board specifically)
b) You need to install the driver for the USB to Serial chip (usually it is CH340) so Google "CH340 driver" but it could also be if I remember correctly CP...{something}

 

[lingqdy1]

Two things could be happening (the a is almost for sure the correct one):
a) You did not install in Arduino IDE the corresponding board or set of boards (f.e. Google "how can I install the board...." f.e. ESP8266 or ESP32 or your board specifically)
b) You need to install the driver for the USB to Serial chip (usually it is CH340) so Google "CH340 driver" but it could also be if I remember correctly CP...{something}

Thanks for your reply, I'll try again at 2 AM.

 

[lingqdy1]

Two things could be happening (the a is almost for sure the correct one):
a) You did not install in Arduino IDE the corresponding board or set of boards (f.e. Google "how can I install the board...." f.e. ESP8266 or ESP32 or your board specifically)
b) You need to install the driver for the USB to Serial chip (usually it is CH340) so Google "CH340 driver" but it could also be if I remember correctly CP...{something}

I followed the method carefully, but it didn't solve the problem! However, thank you for your response.

 

[hatzisn]

Which is your board name? Do you have an aliexpress link?