Under tools, first option "IDE options", sixth option "configuration process time elapsed" is set to 60 seconds by default. You could increase that (don't forget to set it back to 60 seconds). But beware, if the default value is insufficient, there is an underlying reason that ignoring it and suppressing its symptoms will not solve it. The question is what are you doing (perhaps wrong)?
The traffic may be blocked somewhere by an adblocker rule. In that case it will not be displayed. Either the available bandwidth is limited, or your processor is running at maximum speed. A lot is possible. When adding a log, try to follow the steps one by one and see how far you get and/or how long each step takes.
Under tools, first option "IDE options", sixth option "configuration process time elapsed" is set to 60 seconds by default. You could increase that (don't forget to set it back to 60 seconds). But beware, if the default value is insufficient, there is an underlying reason that ignoring it and suppressing its symptoms will not solve it. The question is what are you doing (perhaps wrong)?