B4R Question How to Send and Store in a Database Using MQTT

Example of communicating with a remote database using MQTT and jRDC2: https://www.b4x.com/android/forum/threads/rdc-based-on-mqtt.72416/#content

Hello Erel,
I read the above link which you have shared. I have some more confusion.. As per the link

This is an extension to jRDC2. It adds support for MQTT and allows accessing the remote database with an Arduino or ESP8266 board.

Click to expand...

What I want is to connect the MQTT server [Which I have already installed & configured at VPS cloud server] by using SIM800/SIM900 GSM shield not ESP8266. As ESP8266 is an WI-FI sheild which required a Router.

Now my DHT11 will be at remote location where only SIM800/SIM900 GSM can be used for accessing internet.
Please advice how to connect at GSM800 shield from b4r with MQTT client to MQTT server [Broker].

Thanks-
Pokhraj Das

The relevant example is: https://www.b4x.com/android/forum/threads/http-requests-with-gsm-shield.81382/#content

It sends a Http request. You will not be able to use it with MQTT. You should create a simple server that returns the response you want. You can see how jRDC2 is built. I recommend you to do something simpler with the exact queries you need.

Thanks @Erel for the support and advice. I found that there is Arduino MQTT Library for SIM800/SIM900 GSM Modem. This can be used to connect to TCP server to publish and can store the data at database.
Can this be possible for you to help to make a b4r compatible library.
Please help and advice on this.

Thanks-
Pokhraj Das