B4J Question INA219

If you find Java code that does whatever you need then we can help you port it.

Note that the product name is B4J, not Basic4J.

I Harry, if you are able to communicate via I2C with the sensor then B4J is not the cause of your problem. This is most likely a communication protocol issue.

If I were you I would have a look at this Adafruit Arduino library and look how it exchange data with the chip.

https://learn.adafruit.com/adafruit-ina219-current-sensor-breakout/overview

Hi Toley,

To my best knowledge I had already 'translated' the INA219 library of Adafruit. Today, I went to the very basic. After power up, the contents of the Configuration Register should be 0x399F, at least according to the documentation. But, when I read the Configuration Register after power up and before doing something else, it reads 0x3939. Now I am waiting for a second device, that I need anyhow, to check if it is a device failure or a programming error.

Harrry