RandomAccessFile - Questions & Concerns

Are you using RandomAccessFile.WriteObject / ReadObject?
If you write the object without compressing it then you should get a fixed length.
RandomAccessFile.CurrentPosition is automatically incremented each write, so you can easily see the size of your object.

Hi Erel,

Thank you for your reply, it spurred me on.. I discovered that I made some mistakes in my calculations, I've been used to flat files, and assumed that just iterating with a fixed Type size would work for data writing and retrieval.

It turned out that I was telling it to write to an incorrect position, which was causing it to corrupt the database.

It does appear to be extremely inefficient though, as now that I have it working, the RandomAccessFile system writes a lot of extra data with each record. I was writing a 166 byte type object to file, and it was appending an extra 839 bytes, it quickly became apparent that compression would probably be needed for any reasonable use of this library's object writing/reading features. But then this effects the sequential capabilities.

Is there a chance, as a future feature request to allow for the same object writing, only without the header information tacked on to it? A flat file, with nothing but sequential object data, spaced apart only by the size of the object (as declared by the programmer, whom keeping in mind that it would have to be a fixed size to work properly) could then keep file size down, and also use simple math to get record counts and more easily jump around the file at his/her whim. This would also mean this would never occur:

Note that changing your package name may make older objects files unusable (requiring you to write them again).

Click to expand...

making it far more stable, and powerful in my opinion.


eg:
RAF as RandomAccessFile

RAF.Initialize4(Dir as string, File as string, ReadOnly as boolean, FixedLengthUDT as object)

that once initialized, would perform operations on said file without writing any headers/footers.

And an added function like:
RAF.ObjectSize as int (object size in bytes, returns 0 if no object initialized)

if I know the object size, and my file size, I can easily determine my record count.


my BIG wish list.. I'm super thankful that you've taken the time to reply to my message, and I'd like to hear any feedback on these ideas.. perhaps it's impossible to do, but if I can I'd love to help in any way.

Thanks again!

WriteObject / ReadObject are useful as they allow you to persist all kinds of complicated objects easily.
In your case you should create a simple method that converts your structure to bytes array and vice verse.

Actually a better solution will be to write a method that writes a structure to the stream.

Note that an array of characters converted to a bytes array can be longer than the original array. A single character can take more than a single byte.
If you are only using ascii characters then it is fine.

Hi! This is my first post. I have just registered afnte a few weeks with the demo version convinced me of B4A's excellence. Congratulations for the product and for such a good online support.

The worse part of this is that I am virtually a newcomer to programming (I used to program in my work, but that was back in the 80's!) so I will probably annoy you with some too obvious questions. I will try not to, but if I do, please be tough with me and send me to the manual.

So my first question is... I am trying to test Random Access but it does no seem to be available in the full version (1.9.0.0) I have just installed (neither was it in the demo version). I mean, the tutorial on Random Access reads that I should "dim" the file with

Dim [filename] As RandomAccessFile

but B4A does not admit it. What am I doing wrong?

I have read of special libraries in the Beginner's Guide but according to this:

"When the IDE starts, it looks first for the available libraries in the Libraries folder of B4A and then
in the folder for the additional libraries."

these libraries should be active, shouldn't they?


Thanks for your patience!

Welcome to B4A community.

The RandomAccessfile library is part of B4A.
Click at the Libs tab in the lower right corner.
Check RandomAccessFile library
And you are done.
Beginner's Guide chapter 13.7 Libraries page 182 .

Best regards.

Hi Housefly, I had the same difficulties and this is how I have found for manage this:

First, prepare a fixed lenght string that contains, at fixed offset, all your data. (this works only for asciii type data, not mixed)

Dim noa, buflen As Int
Dim pos As Long
Dim miobuffer As String
Dim buffer() As Byte
Dim Save_Str As String

Save_Str="Name .... Data .... etc" & Chr(13) & Chr(10)

buffer=Save_Str.GetBytes("ASCII")
buflen=Save_Str.Length ' must be fixed lenght
raf.Initialize(File.DirRootExternal & "/path","filename", False)
noa=raf.Size/buflen ' nr of records in the file
pos=recordnumber*buflen
raf.WriteBytes(buffer,0,buflen,pos)
raf.Close


To retrieve records:

raf.Initialize(File.DirRootExternal & "/path", "filename", False)
pos=recordnumber*buflen
raf.ReadBytes(buffer,0,63,pos)
raf.Close
test = BytesToString(buffer, 0, 63, "UTF-8") 'convert the bytes to string

now you can scan the string "test" and find, at the fixed positions you know, all your fields.

Sorry I have written everything not elegant and with some mistakes maybe, but it's enought to understand the concept. In this way also, I have a plain text file that I can read also when I move it to a windows machine.

Bye
Marco