Android Question SOLVED: - B4A-Bridge is not sending installation packages.

[BeneBarros]

B4A-Bridge is not sending installation packages.

Settings are ok. but the cell phone does not receive the installation packages.

Install unknown apps (enabled)
bridge connected
The Designer is not working either.

I've reinstalled the bridge, without success.

 

[mcqueccu]

Have you granted all permissions needed for the Bridge to work?

You can go to Settings->apps->Permission and check

 

[BeneBarros]

Have you granted all permissions needed for the Bridge to work?

You can go to Settings->apps->Permission and check

no permissions denied
does not generate errors... after 60 seconds only timeout
test done on 3 cell phones, none of them worked.
The problem is probably not with the cell phone.

 

[MikeSW17]

Is an earlier version of the App (or one with same name) already installed? If so try deleting it from the phone before loading.

 

[BeneBarros]

no version installed.. i also tried with other B4a applications and the problem is the same

Many years working with B4a. it's the first time it happens

 

[RichardN]

Is the phone on the same Wifi network as your router?

 

[Alex_197]

Many years working with B4a. it's the first time it happens

I have a phone that sometimes gives me the same problem. Did you try another phone?

 

[MikeSW17]

As I said above; I've had this happen a few times, and deleting the App from the phone before re-installing has solved it. Have you tried this?

 

[BeneBarros]

As I said above; I've had this happen a few times, and deleting the App from the phone before re-installing has solved it. Have you tried this?

Even if you don't connect any device the B4a does not generate errors (no device connected). For this reason I believe the problem is on the PC and not on the devices. In every application I try, the same error happens. I have 3 cell phones that I do tests, none of them work... The interesting thing is that Bridge shows how connected.

 

[BeneBarros]

SOLVED: Don't ask me how. I changed the start of Windows to Diagnostic mode, entered, did nothing, restarted again in normal mode, and everything is working normally. Thanks to everyone who tried to help me.