iOS Question [SOLVED] Mac builder unreachable

[Emme Developer]

Hi to all!
I'm using a Mac Builder in Mac OS virtualized using VMWare Workstation Pro. Ip is 192.168.1.88.
When i build the bridge, on iphone 5s i'm not able to see the installation. Ip is recognized from my pc (i tried to ping it and it works), but if i try to test the server i'm not able to see it (unless i test it directly in Mac OS). Strange thing is that i don't see the test, but i'm able to compile and send project from b4i.
I tried also to set manual ip as explained in tutorial.
Can anyone help me? Thanks

 

[Erel]

Strange thing is that i don't see the test, but i'm able to compile and send project from b4i.

This is expected if the Mac is reachable from the PC.

Does it work with the simulator?

 

[Emme Developer]

This is expected if the Mac is reachable from the PC.

Does it work with the simulator?

Yes with simulator works properly

 

[Erel]

You probably need to configure a port forwarding: http://www.virten.net/2013/03/how-to-setup-port-forwarding-in-vmware-workstation-9/

Note that the ip address that you enter on the device must be the same as the ip address printed when the builder is started. If it is not the same then you need to force it to be (see the builder tutorial).

If it doesn't work then you can use the hosted builder together with a local builder.

 

[Emme Developer]

Many thanks for your help.
I solved by setting in this way VMWare