B4R Question Wemos LOLIN32 Pro Board Selector Parameters Needed...

[R_906]

Hi:

I have the Wemos LOLIN32 Pro board and I cannot upload when compiling. I tried the generic ESP8266 and the NodeMCU 1.0 ESP12E options as suggested in another thread. Neither work. By default I think the board is running Python.

The error I get is it is:
//************************************************
Uploading...
esptool v0.4.9 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
setting board to ck
setting baudrate from 115200 to 115200
setting port from COM1 to COM10
setting address from 0x00000000 to 0x00000000
espcomm_upload_file
espcomm_upload_mem
setting serial port timeouts to 1000 ms
opening bootloader
resetting board
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 24 instead of C0
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 08 instead of C0
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 08 instead of C0
resetting board
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 24 instead of C0
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 08 instead of C0
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 08 instead of C0
resetting board
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 24 instead of C0
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 08 instead of C0
trying to connect
flush start
setting serial port timeouts to 1 ms
setting serial port timeouts to 1000 ms
flush complete
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
serialport_receive_C0: 08 instead of C0
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
An error occurred while uploading the sketch
//*************************************************

Any help would be greatly appreciated.

Thanks, Rob

 

[Erel]

It is an ESP32 board: https://www.b4x.com/android/forum/threads/initial-support-for-esp32.75002/#content

 

[R_906]

Hi Erel:

Thank you for your response and help. After reading that thread, I may just stick to using the standard ESP8266 boards.

Thanks, Rob