B4R Question Will this chip work with B4R

[Robert Valentino]

Hi:

Does anyone know if this chip setup will work with B4R

https://www.amazon.com/gp/product/B01IK9GEQG/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1


They say:

• The chip model: CP2102; There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio” https://github.com/espressif/esptool/wiki/SPI-Flash-Modes;
  
  
• Firmware link: https://github.com/nodemcu/nodemcu-firmware; Data download access to the website: http://www.nodemcu.com; Makerfocus nRF24L01+ and ESP8266 ESP-01 Breadboard Breakout Adapter Board is come for free, it can compatible with "nRF24L01+ " and ESP8266 ESP-01. If you need more information about it, pls refer to: https://www.amazon.com/dp/B01N5AK6E1;

BobVal

 

[derez]

The CP2102 is just the part responsible to convert the USB connection to serial for the boards MC (ESP-12E).
If it works with Arduino IDE then it will work with B4R.
I never had one but googling show that the chip CP2102 it is used for usb-to-serial devices so it must be compatible. In "board selection" use the parameters defined in the first paragraph.

 

[XorAndOr]

Does anyone know if this chip setup will work with B4R

hi.
I don't really know the model you put in the link,
but I've been using this in the photo for about 1 year and it works great with B4R.
Select the board in b4r and choose NodeMCU 1.0 (ESP-12E Module).

I use this in the photo:
AZDelivery ESP8266 NodeMCU Amica V2
Module ESP-12E WiFi Development Board
with CP2102 for Arduino with eBook

 

[tigrot]

CP2102 is a converter for USB/RS232, nothing to do for Arduino environment. It's s companion of of main MCU.