B4R Question An error occurred while uploading the sketch ( HC-05 )

Hi all of you.
i use your code and connect zs-40 to UNO and see this error.
B4R Version: 3.00
Parsing code. (0.00s)
Building folders structure. (0.01s)
Compiling code. (0.01s)
Building project (0.04s)
Compiling & deploying Ino project (Arduino/Genuino Uno - COM12) Error
Loading configuration...
Initializing packages...
Preparing boards...
Verifying...
Uploading...
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x33
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x33
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x33
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x0d
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0a
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x33
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x33
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x31
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x0d
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x0a
An error occurred while uploading the sketch

there is not any different when connect
RX to 10 & TX to 11
or
revers.
and can not solve that.