Hi,
based on previous examples Analog Read Example, Analog Read Example using Ethernet, Analog Read Example using MQTT and Analog Read Example using LCD extended the solution by sending the temperature (in Celsius) from the Arduino UNO TMP36 sensor to a PC (running B4J application) via XBee Mesh Network.
Full project (with comments) attached.
Note: Tested also by powering the UNO with a battery, take it to a field and read the temperatures.
Next is to start is building a solution, using the XBee network with several sensors to send data using MQTT to home automation (running on a Raspberry Pi) with a B4J application as the Broker.
based on previous examples Analog Read Example, Analog Read Example using Ethernet, Analog Read Example using MQTT and Analog Read Example using LCD extended the solution by sending the temperature (in Celsius) from the Arduino UNO TMP36 sensor to a PC (running B4J application) via XBee Mesh Network.
Full project (with comments) attached.
Note: Tested also by powering the UNO with a battery, take it to a field and read the temperatures.
Next is to start is building a solution, using the XBee network with several sensors to send data using MQTT to home automation (running on a Raspberry Pi) with a B4J application as the Broker.