Android Question B4A-Bridge Problem on VPN

[gigi0ne]

hello everyone,

small problem with B4A-Bridge.
If I use it in my network everything works properly and I have no connection problem, now I have to use it on a corporate VPN (Romania-Brazil) and it keeps disconnecting.

It connects and immediately disconnects, reconnects and disconnects and so on ad infinitum.

I use OpenVPN 2.6 in UDP, is there any modification I can do to make the connection remain stable?

Thank you

P.S
the connection it's stable
Reply from 192.168.15.105: bytes=32 time=249ms TTL=63
Reply from 192.168.15.105: bytes=32 time=272ms TTL=63
Reply from 192.168.15.105: bytes=32 time=248ms TTL=63
Reply from 192.168.15.105: bytes=32 time=247ms TTL=63
Reply from 192.168.15.105: bytes=32 time=247ms TTL=63
Reply from 192.168.15.105: bytes=32 time=248ms TTL=63
Reply from 192.168.15.105: bytes=32 time=248ms TTL=63
Reply from 192.168.15.105: bytes=32 time=246ms TTL=63
Reply from 192.168.15.105: bytes=32 time=250ms TTL=63
Reply from 192.168.15.105: bytes=32 time=248ms TTL=63
Reply from 192.168.15.105: bytes=32 time=246ms TTL=63
Reply from 192.168.15.105: bytes=32 time=251ms TTL=63
Reply from 192.168.15.105: bytes=32 time=250ms TTL=63
Reply from 192.168.15.105: bytes=32 time=246ms TTL=63
Reply from 192.168.15.105: bytes=32 time=249ms TTL=63
Reply from 192.168.15.105: bytes=32 time=251ms TTL=63
Reply from 192.168.15.105: bytes=32 time=248ms TTL=63

 

[pixet]

I think we need to check the bridge mode for broadcast, I think in OpenVPN it is the tapX interface