iOS Question build not in itunes connect

MList · Mar 11, 2024

Hi, i am trying to publish an update of my app.
#Version: 1.0.04 was uploaded sucessfully. Compilation had no errors.
In apple connect apps i can't see the build. I uploaded it 6 days ago, Today i
uploaded Version 1.0.05 to try again.

1) I was still working with B4i V.810, could that be a problem?
2) Perhaps something went wrong with last Version V1.0.03, cause the build has V1.03 ?

If upload was successfully, where can i look what happened to my app? What could be the reason its not in
build+ section?

Theres a pic.

Thanks a lot for help
Marion

MList · Mar 13, 2024

Upload App to Itunes connect Issue (Build not in itunes connect - follow up)

As a developing issue to @MList question here https://www.b4x.com/android/forum/threads/build-not-in-itunes-connect.159818/#post-981323 I decided to investigate further and we made contact. What we realized is this. 1. Upload App to Itunes Connect (from IDE) gives Successful upload response BUT...

www.b4x.com

Here is the solution, thanks for help

mcqueccu · Mar 11, 2024

You should get a message when upload was succesful and finished processing.

After that when you click on the New version you created (indicated as A) and you check the Build section (indicated as B). You should see a small blue + icon.
Clicking the plus button should give you a popup with the builds that you have uploaded

RichardN · Mar 11, 2024

Was your your last version 1.0.3 refused by Apple during review?

If so delete this version and your new uploaded version 1.0.4 will appear in its place. This procedure is not at all obvious in iTunes

MList · Mar 11, 2024

mcqueccu said:
You should get a message when upload was succesful and finished processing.

After that when you click on the New version you created (indicated as A) and you check the Build section (indicated as B). You should see a small blue + icon.
Clicking the plus button should give you a popup with the builds that you have uploaded

View attachment 151662

Thanks for answering, when i go to A new version. There is no build.
In I Tunes Connect uploader i got the message upload was succesful ! But not finished processing

MList · Mar 11, 2024

RichardN said:
Was your your last version 1.0.3 refused by Apple during review?

If so delete this version and your new uploaded version 1.0.4 will appear in its place. This procedure is not at all obvious in iTunes

Hi, thats an idea. its seems that all versions are expired. How can I delete V.1.0.03 ? And why is Version 1.03 in AppStore ?
?

MList · Mar 11, 2024

RichardN said:
Was your your last version 1.0.3 refused by Apple during review?

If so delete this version and your new uploaded version 1.0.4 will appear in its place. This procedure is not at all obvious in iTunes

Sorry first response with wrong pic...
I think i published V.103 as V.101 thats why it is in App Store. So how can i get my Version 1.04 now ?

mcqueccu · Mar 11, 2024

MList said:
Sorry first response with wrong pic...
I think i published V.103 as V.101 thats why it is in App Store. So how can i get my Version 1.04 now ?

Click on it, and scroll down, you will see the version number, edit and save

RichardN · Mar 11, 2024

@MList

I cannot see what you have done prior to this point, however....

If you have a binary version that has been failed in review, you must delete it in iTunes connect before any subsequent upload will appear for selection.

MList · Mar 11, 2024

mcqueccu said:
Click on it, and scroll down, you will see the version number, edit and save

Sorry but it doesnt work

mcqueccu · Mar 11, 2024

No, You need to change the new one. Not the one already approved

For the New Version which is 1.00.4 (As I indicated in A). You have to be on that one first

mcqueccu · Mar 11, 2024

I just updated an app to version 1.2.0 about 10 minutes ago.
I Uploaded it from from the IDE
I then created the 1.2.0 on the dashboard
Then Select the Build and added, and submit.

ADD Build Popup

MList · Mar 11, 2024

mcqueccu said:
I just updated an app to version 1.2.0 about 10 minutes ago.
I Uploaded it from from the IDE
I then created the 1.2.0 on the dashboard
Then Select the Build and added, and submit.

View attachment 151669

ADD Build Popup

View attachment 151670

Now:
I changed Version 1.00.4 to 1.00.6 and saved it
then i uploaded V1.006 from the ide
There is no build to select

Does it matter if you first upload or first create the app on dashboard ? If yes then i did it the wrong way ?
How long do you have to wait for the build to be in app store connect after upload ?
Thanks again and a lot for your help

mcqueccu · Mar 11, 2024

It doesn't matter which one you created first.

It almost instant. Not more than 2 minutes.

Something must be wrong somewhere because this is not the first version of the app so I don't expect a long delay.

MList · Mar 11, 2024

RichardN said:
@MList

I cannot see what you have done prior to this point, however....

If you have a binary version that has been failed in review, you must delete it in iTunes connect before any subsequent upload will appear for selection.

hi Richard, how can i delete it ??

RichardN · Mar 11, 2024

I've only ever had one app rejected and it took me ages to find out how to delete it so I could continue. I found it eventually on SO.

The answer is that you Mouse over the icon for your build and at the end of the line you'll see a little colored minus in a circle. This removes the build and you can now click on the + sign and choose a new build for submitting.

It is neither obvious or intuitive.

mcqueccu · Mar 11, 2024

How to delete rejected binary from appstore connect

I have my first app (version 1.0.0) approved and live in the app store. I made an update which is version 1.0.1 but it was rejected. I modified the code for the version 1.0.1 but I cannot upload it because the rejected one already exists. Is it possible to delete the rejected binary and...

www.b4x.com

MList · Mar 12, 2024

Thanks again for your answers. There seems to be no rejected version to delete. Could it be the Problem that i published build 1.00.3 as V1.001. ? I never made a correct update in ios. Just published my app the first time. He just doesn't find the build or cannot link it to V.1.00.6. How does he do that link. Does ist have to do with #application Label or packagename ?

RichardN · Mar 12, 2024

@MList

#Version: 1.01

This the value used by iTunes Connect to handle version updates

MList · Mar 12, 2024

RichardN said:
@MList

#Version: 1.01

This the value used by iTunes Connect to handle version updates

Thanks, so that seems ok, see pics

MList · Mar 13, 2024

Upload App to Itunes connect Issue (Build not in itunes connect - follow up)

As a developing issue to @MList question here https://www.b4x.com/android/forum/threads/build-not-in-itunes-connect.159818/#post-981323 I decided to investigate further and we made contact. What we realized is this. 1. Upload App to Itunes Connect (from IDE) gives Successful upload response BUT...

www.b4x.com

Here is the solution, thanks for help

iOS Question build not in itunes connect

Active Member

Attachments

Well-Known Member

Well-Known Member

Active Member

Attachments

Active Member

Attachments

Active Member

Well-Known Member

Well-Known Member

Active Member

Attachments

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Similar Threads

Privacy & Transparency

Privacy & Transparency