Android Question Demo of my app

[Giusy]

Hi,
I having to create a demo of my app. (mp4)
Which support program do you suggest to do?

Thank you

 

[hibrid0]

B4A have an option to record the screen while you have connected with usb cable.

 

[Giusy]

Hi, hibrid0
1 I connect my Samsung with Usb
2 run b4a bridge
3 run in debug mode
4 video capture (record)

Error: error: no devices found

what's my mistake?

 

[Mahares]

No b4a bridge. You must be connected USB only. If you cannot connect to the device via USB, you cannot do it.:
'Tools', then 'Videocapture.

 

[josejad]

Check this:

https://www.b4x.com/android/forum/threads/alternative-to-b4a-bridge-usb-cable-connection.69713/

 

[Giusy]

I connect my Samsung to my Pc
and after?
What are the steps I have to follow?

 

[klaus]

Run the program in Debug mode and then:

 

[Brandsum]

1. Connect your Device to PC via USB
2. Turn on USB Debugging from Developer option.
3. Allow if any popup comes up.
4. B4A > Tools > Clean Project.
5. Run your program (F5)
6. When your app starts
7. B4A > Debug > Video Capture

 

[Giusy]

1. Connect your Device to PC via USB
2. Turn on USB Debugging from Developer option.
3. Allow if any popup comes up.
4. B4A > Tools > Clean Project.
5. Run your program (F5)
6. When your app starts
7. B4A > Debug > Video Capture

I do not have this choice on my samsung: Turn on USB Debugging from Developer option.

 

[Giusy]

I managed to activate the developer function on my samsung

(In Android 4.2 and higher versions, the Developer Options menu and USB Debugging option have been hidden. In former 4.X versions of Android, USB Debugging option is under Developer Options menu.)

Thank you all

 

[Giusy]

hi,
now the program start without b4a bridge in debug mode, but when I press B4A > Debug > Video Capture
I have the same error
Error: error: no devices found

Android version 4.4.2

Thanks

 

[Brandsum]

hi,
now the program start without b4a bridge in debug mode, but when I press B4A > Debug > Video Capture
I have the same error
Error: error: no devices found

Android version 4.4.2

Thanks

Did you clean your project before running? check point 4 above.

 

[Giusy]

Hi, Brandsum
Yes, but only one time the program run without b4a bridge
developer is active
debug Usb is active
but the device write:
connected as a multimedia device (and not as debug)

 

[mcqueccu]

Double check to make sure that the USB DEBUGGING is on.

Next, on the Log tab, click on connect, if the log displayed succesful connection, then you are good to go.

if still it says cannot connect, Goto the IDE under tools, click on RESTART ADB SERVER. Wait for some few seconds and connect again.

 

[Brandsum]

If your device and USB both are working fine then the device should show a notification: USB Debugging Connected.

If that is not there then:

1. Check using another USB
2. Reboot your device because sometimes it goes offline.
3. Check if USB debugging is on.
4. Some devices have two USB debugging option check and turn that on if it is there.
5. And as @mcqueccu said Restart ADB server.

 

[Giusy]

iH
Developer in "ON"
Usb debug is checked
Check using another USB OK
Reboot my device OK
Clean Project OK
Run in debug mode OK

 

[Brandsum]

Is there any USB Debugging Connected notification on your device when you connect your device via USB?

 

[Computersmith64]

iH
Developer in "ON"
Usb debug is checked
Check using another USB OK
Reboot my device OK
Clean Project OK
Run in debug mode OK

What happens when you connect your device via USB, then go into the Log tab in B4A & click on the "Connect" button?

If you are getting the same error & running Windows 10, I have had issues previously where Windows updates have installed drivers that won't work with some of my Android devices. If you connect your device via USB, then go into Windows Device Manager & either you're not seeing your device, or you're seeing a yellow warning for it then you might need to reinstall the correct driver. In my case, I find the "Android Composite ADB Interface" driver works with all my devices.

- Colin.

 

[Giusy]

Hi, Colin
in Window device manager I see 3 devices: Samsung - Pc - mouse
I have windows 7
If I click on the "Connect" button I see ten Ip adress

 

[Computersmith64]

If I click on the "Connect" button I see ten Ip adress

No - you're clicking on Tools->B4A Bridge->Connect. What happens if you click on the "Connect" button at the bottom of the Logs tab (on the right hand side of the IDE screen)?

- Colin.