Hello,
here is my next attempt to write a lib for B4R
The Lib based on the following Libraries (you have to install this bevor you can use this lib):
https://github.com/horihiro/esp8266-google-tts
https://github.com/horihiro/esp8266-google-home-notifier
https://github.com/mblythe86/Arduino/tree/master/libraries/ESP8266mDNS
attention: horihiro wrote that we can use Arduino Core for ESP8266 2.5.0 please don't do so this core is still in beta stadium an seems (at the moment) not work together with b4r
i have Testet with the ESP8266 board
regards
Andy
here is my next attempt to write a lib for B4R
The Lib based on the following Libraries (you have to install this bevor you can use this lib):
https://github.com/horihiro/esp8266-google-tts
https://github.com/horihiro/esp8266-google-home-notifier
https://github.com/mblythe86/Arduino/tree/master/libraries/ESP8266mDNS
attention: horihiro wrote that we can use Arduino Core for ESP8266 2.5.0 please don't do so this core is still in beta stadium an seems (at the moment) not work together with b4r
i have Testet with the ESP8266 board
regards
Andy
B4X:
#Region Project Attributes
#AutoFlushLogs: True
#CheckArrayBounds: True
#StackBufferSize: 300
#End Region
Sub Process_Globals
'These global variables will be declared once when the application starts.
'Public variables can be accessed from all modules.
Public Serial1 As Serial
Public ghome As ESP8266ghn
Public wifi As ESP8266WiFi
Public result As Byte
End Sub
Private Sub AppStart
Serial1.Initialize(115200)
Log("AppStart")
wifi.Connect2("<yourssid>","<yourpassword>")
result = ghome.notify("Büro","de",30000,"das ist ein test",False)
If result<>"success" Then
Log ("Error: ",result)
End If
Delay(2000)' wait for google home become ready
result=ghome.playmp3("Büro",30000,"http://siam-online.de/bell.mp3",False)
If result<>"success" Then
Log ("Error: ",result)
End If
Log ("Done.")
End Sub