Other Problem with ESP32 and SD card...

[rbghongade]

Dear friends,
Tried to interface LOLIN32 with SD card but got compilation error:

D:\DEVELO~1\WEMOSP~1\WEMOS_SD\B4R_SD~1\Objects\bin\sketch\rSD.cpp:11:7: note:   initializing argument 2 of 'bool B4R::B4RSD::open(B4R::B4RString*, Int)'
  bool B4RSD::open (B4RString* FileName, Int mode) {
       ^
D:\DEVELO~1\WEMOSP~1\WEMOS_SD\B4R_SD~1\Objects\bin\sketch\rSD.cpp: In member function 'bool B4R::B4RSD::OpenReadWrite(B4R::B4RString*)':
rSD.cpp:25: error: invalid conversion from 'const char*' to 'Int {aka short int}' [-fpermissive]
   return open(FileName, FILE_WRITE);
                                   ^
D:\DEVELO~1\WEMOSP~1\WEMOS_SD\B4R_SD~1\Objects\bin\sketch\rSD.cpp:11:7: note:   initializing argument 2 of 'bool B4R::B4RSD::open(B4R::B4RString*, Int)'
  bool B4RSD::open (B4RString* FileName, Int mode) {
       ^
Multiple libraries were found for "SD.h"
Used: C:\Users\RAJESH\Documents\Arduino\hardware\espressif\esp32\libraries\SD
Not used: C:\Program Files (x86)\Arduino\libraries\SD
exit status 1

It seems there is some incompatibility with ESP32 SD library! (Probably needs a new/modified wrapper!)
This Arduino sketch works fine:

 

[Erel]

Try this:

Private Sub AppStart
    Serial1.Initialize(115200)
    Log("AppStart")
    Log("Initialize: ", sd.Initialize(5)) '4 is the CS pin when using the ethernet shield
    Log("OpenReadWrite: ", sd.OpenReadWrite("/log.txt"))
    sd.Stream.WriteBytes("abcde", 0, 5)
    sd.Close
    Log("Open: ", sd.OpenRead("/log.txt"))
    Log("Size: ", sd.CurrentFile.Size)
    sd.Close
    Log("Free memory: ", AvailableRAM)
End Sub

 

[whcir]

Try this:

Private Sub AppStart
    Serial1.Initialize(115200)
    Log("AppStart")
    Log("Initialize: ", sd.Initialize(5)) '4 is the CS pin when using the ethernet shield
    Log("OpenReadWrite: ", sd.OpenReadWrite("/log.txt"))
    sd.Stream.WriteBytes("abcde", 0, 5)
    sd.Close
    Log("Open: ", sd.OpenRead("/log.txt"))
    Log("Size: ", sd.CurrentFile.Size)
    sd.Close
    Log("Free memory: ", AvailableRAM)
End Sub

Yes Erel, adding the "/" before the file name worked

Thank you