Reverse Screen Orientation and Compass

Adding the Phone library will not add any permission. Permissions are only added when you declare a variable that requires a specific permission (you can see the permissions in the documentation: Basic4android - Phone)
The sensors do not require any permission.

I think you'll find your problem is more a device related problem than a programming problem.

I've found that some devices have a buggy implementation of sensors and will give unpredictable orientations - cheap chinese tablets seem to be big offenders here.
Other device's work perfectly - it's all dependant on the manufacturer's implementation of orientation detection in their firmware.

Martin.

@Erel: thank you for the lecture, this is good knowing.

@warwound
Thanks a lot for your thoughts. It's not a Chinese tablet, but an "NEC Lifetouch".
The orientation sensors are quite accurate. Naturally, when you rotate the tablet, say,
from portrait to reverse portrait, then North and South swap, which does make sense.

That's why I thought it would be useful to be able to determine the present screen
orientation programmatically and add an appropriate offset to the sensor's value.

Phone1.SetScreenOrientation(7/8) invoke reverse mode, in that, analog to this something
like a "GetScreenOrientation" command could perhaps be implemented, provided the O/S
follows device rotations.

Cheers

Robert

You can use this code:

Excellent, Erel!
Thanks so much for your time.
Robert

Erel said:

You can use this code:

Click to expand...

Erel,

On my Samsung Ace phone it always seem to return 0?

does it only work when allowing landscape & portrait? (this test if forced to portrait)

ok, it seems that it gets set at a valid rotation only. It's not changing when rotating the phone in a forced orientation.