Bug? Designer does not work?

[vecino]

Hello, B4A version 3.50
Connect To Device / Emulator F2

In the tablet screen does not change anything but go to the "Designer Scripts" tab, even if you press F5, nothing changes on the screen of the tablet.

What can it be?

Thanks and regards.

 

[NJDude]

Have you created a script?

 

[vecino]

Yes

'All variants script
'AutoScaleRate(1)
'AutoScaleAll

pnMenuSuperior.SetLeftAndRight(0,100%x)

imgLogo.Left=(100%x - imgLogo.Width)/2
imgLogo.Top =(100%y - (imgLogo.Height+pnMenuSuperior.Height+pnFoot.Height))/2

' ventas Ficheros Salir Acerca de
btVenta.Top =0
btFicheros.Top =0
btSalir.Top =0
btAcerca.Top =0
'
btSalir.Left =1
btFicheros.Left =btSalir.Right
btVenta.Left =btFicheros.Right
'
btAcerca.Right =100%x
'
pnFoot.SetLeftAndRight(0,100%x)
pnFoot.Bottom=100%y
'
pnTrans.SetLeftAndRight(0,100%x)
pnTrans.SetTopAndBottom(0,100%y)
pnAcercade.Left = (100%x-pnAcercade.Width)/2
pnAcercade.Top = (100%y-pnAcercade.Height)/2
imgAD.Left=(pnAcercade.Width-imgAD.Width)/2
imgAD.Top = 20dip
Label4.Top=imgAD.Bottom
Label4.SetLeftAndRight(0,pnAcercade.Width)
pnRaya1.Height=2dip
pnRaya1.SetLeftAndRight(0,pnAcercade.Width)
pnRaya1.Top=Label4.Bottom
Label5.Top=pnRaya1.Bottom+10dip
Label5.SetLeftAndRight(0,pnAcercade.Width)
btRegistro.Top=Label5.Bottom
btRegistro.SetLeftAndRight(0,pnAcercade.Width)
Button5.Left=(pnAcercade.Width-Button5.Width)/2
Button5.top=btRegistro.Bottom + 20dip
'
pnTrans2.SetLeftAndRight(0,100%x)
pnTrans2.SetTopAndBottom(0,100%y)
pnRegistro.Left = (100%x-pnRegistro.Width)/2
pnRegistro.Top = (100%y-pnRegistro.Height)/2
pnRaya2.Height=2dip
pnRaya2.SetLeftAndRight(0,pnRegistro.Width)
pnRaya2.Top=lb4.Bottom
bt1.Left=(pnRegistro.Width-bt1.Width)/2
'
pnT.SetLeftAndRight(0,100%x)
pnT.SetTopAndBottom(0,100%y)
'

 

[NJDude]

I haven't tried your code, but here I have no problems with the designer.

 

[vecino]

Hello, the problem is not with the "Dessigner" but with the presentation in "real time" on the tablet. It does nothing in the tablet.
However, with the 3.20 version shown itself properly on the tablet "in real time".
Regards

 

[Erel]

The designer hasn't been modified in v3.50. You can try to uninstall B4A Designer from your tablet and then connect it again (if you are using B4A-Bridge).

 

[vecino]

Hello, I think I found the problem: Invisible panels show content on the tablet.

 

[vecino]

Hi, but with other "layout" does work well and stay invisible.

 

[vecino]

As you can see in the screenshots, there is a problem.

 

[Erel]

See this discussion: http://www.b4x.com/android/forum/threads/designer-visible-items.37122/#post-232101

 

[vecino]

Ok, thank you.